精品视频在线免费,欧美在线区,91亚洲国产

現在位置：首頁>自動化儀器儀表>傳感器/變送器> 壓力變送器

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾防爆壓力變送器

商品編號：19641

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾防爆壓力變送器

價格：詢價

產地：美國更新時間：2020-10-28 14:40

品牌：德威爾型號：IS626-12/13/14/15/16-GH-P1-E1-

狀態：正常點擊量：1403

在線留言

400-006-7520

聯系我時，請說明是在上海非利加實業有限公司上看到的，謝謝！

上海非利加實業有限公司

聯 系人： 上海非利加實業有限公司

電話： 400-006-7520

傳真： 400-006-7520

配送方式： 上海自提或三方快遞

聯系我時請說在上海非利加實業有限公司上看到的,謝謝！

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾防爆壓力變送器

IS626系列本安型防爆壓力變送器可以把壓力轉換為標準4-20 mA信號輸出，使用316/316L不銹鋼材質，可以精確的測量兼容性的氣體和液體。擁有0.25%的高精確，NEMA 4X（IP66）不銹鋼防護可使本產品應用于工業環境中。IS626具有高抗震性，并有3＂電纜和M-12型4針連接可選。

IS626系列通過了UL認證可以適用于危險場合，具有本安型防護。

The Dwyer SERIES IS626 Intrinsically Safe Pressure Transmitter can be used to

accurately measure compatible gases and liquids compatible with its 316/316L

stainless steel wetted parts. Series IS626 full-scale accuracy is 0.25%. Designed for

industrial environments with a NEMA 4X (IP66) housing, this transmitter resists most

effects of shock and vibration. Models are available with a 3′ cable or M-12 4 pin

connection.

The IS626 is UL listed for use in Hazardous (Classified) Locations. The protection

method is by Intrinsic Safety, “ia”. It was investigated by UL under UL Standard 913

Sixth Edition and CSA Standard No. 157-92.

產品參數

IS626-12/13/14/15/16-GH-P1-E1-S1 Dwyer德威爾防爆壓力變送器

Service: Compatible gases and liquids.

Wetted Materials: Type 316, 316L SS.

Accuracy: 0.25% FS; absolute range: 0.5% FS (includes linearity, hysteresis, and repeatability).

Temperature Limit: 0 to 176°F (-18 to 80°C).

Compensated Temperature Range: 0 to 176°F (-18 to 80°C).

Thermal Effect: ±0.02% FS/°F (includes zero and span).

Pressure Limits: See Catalog page.

Power Requirements: 10 to 28 VDC.

Output Signal: 4 to 20 mA.

Response Time: 50 ms.

Loop Resistance: 0 - 900 Ω maximum.

Current Consumption: 38 mA (maximum).

Electrical Connections: 3 ft. cable or 4-pin M-12 Connector.

Process Connection: 1/4" male/female NPT and BSPT.

Enclosure Rating: NEMA 4X (IP66).

Mounting Orientation: Mount in any position.

Weight: 8.9 oz (252 g).

Agency Approvals: CE, cULus Intrinsically Safe to UL Standard 913.

For use in Hazardous (Classified) Locations:

Class I Div. 1 Groups A,B,C,D; Class II Div. 1 Groups E,F,G; Class III Div. 1.

Temperature Code: T4 @ 80°C ambient.

Install in accordance with control drawing 01-700797-00.

WARNING: To prevent ignition of flammable or combustible atmospheres, disconnect power before servicing. Use with approved safety barriers using entity evaluation.