超级碰在线-超级碰碰永久免费视频播放-超级碰碰碰免费视频播放-超级碰碰碰免费视频-亚洲国产99在线精品一区69堂-亚洲高清资源在线观看

TE56 多點環塊試驗機
TE56 MULTI-STATION BLOCK ON RING MACHINE 

ASTM G 137-95

The Multi-Station Block-on-Ring Machine is a cost effective wear and friction test machine with simple test specimens offering conforming and non-conforming block-on-ring contact geometry. It has a series of four friction and wear test stations independently loaded but on a common rotating shaft. The machine meets and exceeds the requirements of ASTM G 137-95. Relocating block specimen holders provide for accurate repositioning of the specimens after weighing: this enables wear to be measured during long period tests. The control unit includes a SLIM 2000 Serial Link Interface Module and Windows based software for control and data acquisition.

Technical Specifications: 

Number of Test Stations: FOUR
Contact Geometry: Conforming Block on Ring；Non-conforming Block on Ring
Load Range: 0 to 150 N (1 N resolution)
Rotational Speed Range: 10 to 380 rpm
Sliding Speed Range: 0.04 to 2 m/s
Ring Specimen: 100 mm diameter x 16 mm wide
Block Specimen: 6.35 mm x 6.00 mm x 12.7 mm (from IZOD bar) and 14 mm x 14 mm x 4 mm (from tensile strip)
Interface: SLIM 2000 Serial Link Interface Module
Software: COMPEND 2000 control and data acquisition software
Motor: 0.55 kW ac