挺进美女教师的蜜桃肥臀视频-同性恋一级片-同性情a三级a三级a三级-同性做爰猛烈全过程-91丨porny丨国产麻豆-91丨porny丨国产入口

CartiGen三維軟骨組織塊壓力加載培養系統

CartiGen 體外三維軟骨組織機械力刺激培養分析系統能夠為生物反應器內的生多種細胞和組織生長提供壓應力培養。培養室種類多樣,單室可以容納***個樣本的直徑 30 毫米 x 厚 5 毫米的組織樣品。12 孔培養室可以容納大小不超過 10 毫米直徑 x 5 毫米厚的 12 個樣品,培養室種類多。系統使用 40N 線型電機來監控/控制集成的負載細胞,提供各種波形,用戶甚至可以自定義波形。

軟骨構建三維力學刺激體外培養多艙生物反應器動態周期性壓應力持續循環壓力負荷周期性刺激誘導軟骨分化組織工程
C9-X CartiGen生物反應器 
C9 - X系統被設計成***個多樣品生物反應器系統,能夠支持廣泛的細胞和組織的生長實驗。反應艙***多可容納9個圓盤形樣品,***大的直徑8mm大小x 5mm厚。 C9 - X的獨特的設計集成了內室底部多孔壓板允許通過樣本結構的灌注。此功能可讓研究人員直接通過結構的流動,同時采用壓縮力刺激。可選功能,如額外的機械傳感器和灌注系統定制儀器的具體研究中的應用。 
生物反應器可為組織培養物提供不同大小和頻率的壓應變以及不同流量的灌流條件,可控精度高、操作簡單可行、性能穩定

CartiGen三維軟骨組織塊壓力加載培養系統

Chambers: Fabricated out of bioinert, autoclavable materials, the CartiGen bioreactor chambers apply

oscillatory compressive/tensile stimulation to disc shaped samples. The chambers can be used with a

variety of construct materials by choosing one of our many chamber options. Maximum sample size is 10 mm 

diam-eter by 5 mm thick, for a standard single sample chamber.

A custom silicone seal provides a mechanical feed-through

and maintains a sterile environment while allowing axial

motion with minimal resistance.

C10-1 Chamber:

Sample Size - 1

Maximum Diameter - 30mm

Maximum Thickness - 5mm

C10-12 Chamber:

Sample Size - 12

Maximum Diameter - 10mm

Maximum Thickness - 5mm

Unique design includes optical grade windows on the bot-

tom of the chamber for confocal viewing during culture.

C9-X Chamber:

Sample Size - 9

Maximum Diameter - 8mm

Maximum Thickness - 5mm

Minimum Thickness - 2mm

Unique design provides directed perfusion through each of

the samples during culture on a common flow loop

DynaGen ? Stimulator: The CartiGen bioreactor system

includes the TC20 tension/compression mechanical

stimulator. This 40 Newton linear motor is lightweight, compact,

corrosion resistant and compatible with most

standard incubators. The TC20 stimulator can be used with any

of the CartiGen bioreactor chambers.

Stimulator Specifications:

Height: 10.5 inches  Footprint: 5 inches by 7 inches

Weight: 5.5 pounds

GrowthWorks ? Control System: A fifth generation design, the

GrowthWorks ?  Software and control platform includes ad-

vanced capabilities, such as multiple waveform control, data

aquisition and multi-motor operation. The intuitive software

runs on a laptop computer under Windows XP and features a

simple user interface. User defined stimulation profiles are con-

trolled by the computer and readily monitored using graphic

displays. Integrated data aquisition routines capture and record

data at user prescribed intervals.

Featuring a 32 bit Intel based CPU and integrated motor drives,

the control hardware communicates with the laptop using a

network cable. GrowthWorks ? can be configured to run four

stimulators and monitor up to 8 transducers, allowing the re-

searcher to customize the system functionally. The controller

can be upgraded with additional modules for

applications requiring automation features or additional

axes of mechanical stimulation.

Straightforward and adaptable,

GrowthWorks ?  provides the ideal

control platform for mechanically

stimulated tissue growth.

CartiGen三維軟骨組織塊壓力加載培養系統

系統簡介:

CartiGen 體外三維軟骨組織機械力刺激培養分析系統能夠為生物反應器內的生多種細胞和組織生長提供壓應力培養。培養室種類多樣,單室可以容納***個樣本的直徑 30 毫米 x 厚 5 毫米的組織樣品。12 孔培養室可以容納大小不超過 10 毫米直徑 x 5 毫米厚的 12 個樣品,培養室種類多。系統使用 40N 線型電機來監控/控制集成的負載細胞,提供各種波形,用戶甚至可以自定義波形。

C9-X CartiGen生物反應器 

C9 - X系統被設計成***個多樣品生物反應器系統,能夠支持廣泛的細胞和組織的生長實驗。反應艙***多可容納9個圓盤形樣品,***大的直徑8mm大小x 5mm厚。 C9 - X的獨特的設計集成了內室底部多孔壓板允許通過樣本結構的灌注。此功能可讓研究人員直接通過結構的流動,同時采用振動壓刺激。可選功能,如額外的機械傳感器和灌注系統定制儀器的具體研究中的應用

我們的產品有三維力學加載細胞組織培養系統、三維軟骨力學刺激生物反應器、3D血管搏動培養系統、3d肌腱韌帶力學培養生物反應器、3d心臟瓣膜培養系統、三維骨應力刺激生物反應器、三維皮膚力學機械刺激生物反應器、3D灌注培養生物反應器、3d支架培養系統、多樣品三維力學加載細胞組織培養系統。