NE-8000 High Pressure Programmable Single Syringe Pump
NE-8000高壓可編程單注射泵
Model: NE-8000
Description:
Holds 1 Syringe up to 140 mL. (200 mL partially filled)
Infusion rates from 1.733 μL/hr (1 mL syringe) to 340.6 mL/min (140 mL syringe)
Easy-to-use keypad interface
Space Saving Chassis: Foot print size of only 11 1/4" x 6 1/8"
Won't take up unnecessary space on your laboratory or production bench
Includes all the advanced functions and programming features of the NE-1000 series
200 lbs Maximum Force:
The NE-8000 produces about 200 lbs of linear force at slow speeds and 100 lbs at top speed. Pressure output is relative to the syringe size.
Features of the NE-8000 Series of Syringe Pumps:
?Built-in adjustable and programmable limit switches for infusion and withdrawal
?Adjustable force limit reduces maximum force
?Fully programmable; Designed for automation
?Operates stand-alone or from a computer
?Infusion and withdrawal
?Set a single pumping rate and/or dispensing volume
?Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
?Network, control, and monitor up to 100 pumps with one computer
?Worldwide power supplies available
?Dispensing accuracy of +/-1%
?Unlimited lifetime technical support
?Two year warranty
Special Application: Continuous Infusion (Push-Pull) and Dual Syringe Pump
Using 2 NE-8000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.
Example Flow Rates NE-8000:
Syringe Size | Maximum Rate | Minimum Rate |
0.5 μL | 150.1 μL/hr | 0.001 μL/hr |
1 mL | 311.3 mL/hr | 1.726 μL/hr |
3 mL | 1317 mL/hr | 7.306 μL/hr |
5 mL | 2193 mL/hr | 12.17 μL/hr |
10 mL | 3577 mL/hr | 19.84 μL/hr |
20 mL | 5689 mL/hr | 31.54 μL/hr |
30 mL | 7421 mL/hr | 41.15 μL/hr |
50 mL | 201.1 mL/min | 66.9 μL/hr |
140 mL | 340.6 mL/min | 113.3 μL/hr |
Firmware and Program Memory Upgrade Options:
Firmware Upgrades available to enable Linear Pumping, add additional programming functions, and to increase Pumping Program Memory
Model: FW-1-X
Extra Features: X upgrade adds Linear/Gradient flow rate ramping, and additional advanced programming functions.
Model: FW-1-X2
Extra Features: X2 upgrade includes all features of the X firmware upgrade, plus increases the programming memory from 41 to 340 Phases, and increases the max RS-232 baud rate to 38,400.
NE-8000,高壓可編程單注射泵
滬公網(wǎng)安備31011502016460號(hào)
